Dispersant Boost NuWell 400 Non-Ionic Surfactant

Nu-Well 400 non-ionic surfactant is a non-ionic surfactant capable of use over a wide pH range. The non-ionic nature ensures that the surfactant neither reacts directly nor interferes with any other chemical being used. The surfaceactive properties of Nu-Well 400 non-ionic surfactant are excellent for improving penetration of hard deposits or for wetting surfaces to be cleaned. Nu-Well 400 non-ionic surfactant may be used to improve flow characteristics of heavy fluid or muds used in well construction. By changing the surface tension, Nu-Well 400 non-ionic surfactant improves cleanup of oil or biologically fouled areas. ApplicationNu-Well 400 is surfactant designed to improve cleaning efforts in tight formations or heavily impacted well systems.Nu-Well 400 non-ionic surfactant is used at the rate of 1 gal. per 1,000 gal. of water in the system to be cleaned or the total gallons of cleaning solution to be used. If the system is being cleaned for oil or heavy biofouling, use Nu-Well 400non-ionic surfactant at the rate of 1 gal. per 500 gal. of water. Physical properties, shipping and handlingAppearance: Pale yellow colored liquidDensity: 9.4 lbs./gal.pH (as shipped): 7.5-8Specific Gravity: 1.13Freeze point: 30°F (-1°C)Volatility: 25%Solubility (in water): 100%Use range: 0.01 to 0.1% by volume – Not regulated as a hazardous material under 49CFR 172.101 RCRA, RCRA 40CFR261, SARA and CERCLA– This product is not contained in any of the listings; no reportable inventory listings are required, and waste from this product is not considered a hazardous substance– The product is not considered dangerous and requires no special handling. Avoid contact with strong acids or alkaline-based products– 1 gal. and 5 gal. containers can be shipped by UPS ground delivery– Additional physical and handling data are available on the product SDS– Available in 1, 5, 30 and 55 gal. containers