Groundwater Sampling - Tubing - HDPE High Density Polyethylene

HDPE High Density Polyethylene

High Density Polyethylene Tubing (HDPE) is popular in the environmental industry due to its resistance to VOCs and naturally occurring gasses. HDPE provides better flow rates, greater lifts and stretches less than LDPE (low density). Because of its rigidity, High Density Polyethylene is the preferred tubing for deeper monitoring wells. On PFOA / PFOS sensitive sites, HDPE is replacing Teflon as the tubing of choice.

ECT Mfg's HDPE tubing was tested to see if it would contribute detectable PFAS compounds to exposed field samples. ECT's HDPE tubing was submitted to an independent laboratory for analysis of the presences of 40 PFAS compounds including PFOS and PFOA. Laboratory results found that ECT's HDPE tubing was non-detect for all 40 PFAS compounds tested using EPA Laboratory Method 537M. ECT’s HDPE tubing is an unlikely source of contamination for Perfluoroalkyl and Polyfluoroalkyl (PFAS) substances in field samples.

7 Items

Quick view Compare Choose Options

ECT Mfg., Inc.

.17" x 1/4" HDPE Tubing

Use with Waterra SS-6 and SS-9 Micro Flow Foot Valves

High Density Polyethylene Tubing .17 x .25 SpecificationsMaterial: High Density Polyethylene / HDPEColor: NaturalInside Diameter: .17" or 11/64"Outside Diameter: .25" or 1/4"Wall Thickness: .04"Max Pressure: 260 PSI at 72°FTemp Range: -93°F -...

MSRP:

Was:

Now: $15.00 - $71.50

MSRP:

Was:

Now: $15.00 - $71.50
Quick view Compare Choose Options

ECT Mfg., Inc.

1/4" x 3/8" HDPE Tubing

Use with Waterra SS-10 Micro Flow Foot Valve

ECT's HDPE Micro Flow Tubing (High Density Polyethylene) provides a stronger valve-tubing connection, especially with the male threaded valves, because it is stiffer and gives less when the valve is threaded into the tubing. FEATURES Produced from...

MSRP:

Was:

Now: $25.60 - $110.00

MSRP:

Was:

Now: $25.60 - $110.00
Quick view Compare Choose Options

ECT Mfg., Inc.

5/16" x 7/16' HDPE Tubing

Use with Geoprobe Bladder Pump

Polyethylene tubing is economical and suitable for many general purposes, including air, water and chemical transfer lines. Our polyethylene tubing is manufactured from raw materials that meet FDA requirements. HDPE has higher pressure and abrasion...

MSRP:

Was:

Now: $296.00

MSRP:

Was:

Now: $296.00
Quick view Compare Choose Options

ECT Mfg., Inc.

3/8" x 1/2" HDPE Tubing

Use with Waterra SS-13 and D-13 Low Flow Foot Valves

Approved for PFAS sampling, ECT's Polyethylene tubing is economical and suitable for many general purposes, including air, water and chemical transfer lines. Our polyethylene tubing is manufactured from raw materials that meet FDA requirements. HDPE has...

MSRP:

Was:

Now: $31.00 - $126.50

MSRP:

Was:

Now: $31.00 - $126.50
Quick view Compare Choose Options

ECT Mfg., Inc.

1/2" x 5/8" HDPE Tubing

Waterra SS-16, SS-19, D-16, D-25 Standard Flow Foot Valves

Polyethylene tubing is economical and suitable for many general purposes, including air, water and chemical transfer lines. Our polyethylene tubing is manufactured from raw materials that meet FDA requirements. HDPE has higher pressure and abrasion...

MSRP:

Was:

Now: $42.90 - $166.00

MSRP:

Was:

Now: $42.90 - $166.00
Quick view Compare

ECT Mfg., Inc.

3/4" x 1" HDPE Tubing

Use with Waterra SS-32 and D-32 Standard Flow Foot Valves

Call for Price

Approved for PFAS sampling, ECT's High Density Polyethylene Tubing 3/4" ID x 1" OD thick wall Down the Hole tubing is designed to work with the Waterra Groundwater Sampling Pump System (Inertial Pump). Approved for PFOA / PFOS samplingDedicating...
Quick view Compare Choose Options

ECT Mfg., Inc.

0.814" x 1" HDPE Tubing

Use with Waterra SS-32 and D-32 High Flow Foot Valves

Approved for PFAS sampling, ECT's High Density Polyethylene High Flow Tubing provides the best performance in deeper groundwater monitoring wells because of it’s rigidity. It is an essential part of the Waterra Pump High Flow System. The stiffness...

MSRP:

Was:

Now: $99.00

MSRP:

Was:

Now: $99.00