1.1" Steel Anchor Point
- SKU:
- SVPT97
The anchor point is used to add weight and stability to your implant probe. The weight of the anchor point helps the implant deploy and stay in position. The point is compatible for use with 1.25" and 1.5" Direct Push probe rods when deploying the implant through ID of the rod.
Specifications
Material: Steel
OD: 1.10"
Length: 2.16"
Weight: 3.6 oz.
Thread: 5/16 - 24 Left-hand thread
Applications
Used with all mesh implants with reverse thread tip. Works with 3", 6", 12" and 21" Stainless Steel Implants.
-
Description
The anchor point is used to add weight and stability to your implant probe. The weight of the anchor point helps the implant deploy and stay in position. The point is compatible for use with 1.25" and 1.5" Direct Push probe rods when deploying the implant through ID of the rod. SpecificationsMaterial: SteelOD: 1.10"Length: 2.16"Weight: 3.6 oz.Thread: 5/16 - 24 Left-hand thread ApplicationsUsed with all mesh implants with reverse thread tip. Works with 3", 6", 12" and 21" Stainless Steel Implants.
The anchor point is used to add weight and stability to your implant probe. The weight of the anchor point helps the implant deploy and stay in position. The point is compatible for use with 1.25" and 1.5" Direct Push probe rods when deploying the implant through ID of the rod.
Specifications
Material: Steel
OD: 1.10"
Length: 2.16"
Weight: 3.6 oz.
Thread: 5/16 - 24 Left-hand thread
Applications
Used with all mesh implants with reverse thread tip. Works with 3", 6", 12" and 21" Stainless Steel Implants.
ECT Mfg
1.1" Expendable Steel Point
Our 1.1" Expendable Point is designed to fit both Geoprobe® 1.25" and 1.5" Expendable Point Holders. This point is commonly referred to as a 1" expendable point. It is often used for vapor sampling...
Schumaprobe 1" Sparge Point
In Stock
Porous polyethylene well screen, designed to minimize flow resistance by providing 35% – 45% porosity uniformly distributed along the entire length of the well screen. Greater porosity, uniform pore...
ECT Mfg
1" Threaded Male / Female Point
8 TPI
Solid Grey Sch40 PVC machined point is much stronger than hollow white PVC molded points. 8 TPI Flush Thread Fits Sch40 and Sch80 Connection Male and Female Point Available OD: 1.315"
Johnson Screens®
1-1/4" Stainless Steel Drive Pt
Johnson Screens stainless steel drive points are highly resistant to corrosive waters, avoiding problems of rapid corrosion and incrustation that can occur in two-metal construction. Drive points...