2.5"-4.25" Pneumatic Packer Model 34B
- SKU:
- PKR-34B
Packer tests consist of isolating specific sections of a bedrock borehole with inflatable packers. Water-quality samples can then be collected and aquifer tests can be carried out. A series of such tests allows for the definition of the vertical distribution of water quality (usually contaminants) and hydraulic conductivity or pathways for water and contaminant movement in an aquifer.
Monitoring water levels in nearby wells while pumping packed intervals can identify permeable intervals within an aquifer.
Information from the packer tests can then be used to properly site the future location of monitoring wells.
Solutions
Smaller packers designed to fit a submersible sampling pump can be used to replace " nested wells" to isolate the lower part of a monitoring well. Isolation by the packer allows reduced water volumes to be purged prior to sampling. This reduction can be beneficial because it can reduce purge times and may limit the handling and disposal of contaminated water.
Specifications:
|
Max Pressure
|
185psi / 13kg/cm²
|
|
Max Diameter
|
5in / 127mm
|
|
A - At Rest Diameter
|
2.13in / 54mm
|
|
B - Mandrel ID
|
1in / 25mm
|
|
C - Element Length
|
24.5in / 620mm
|
|
D - Overall Length
|
48in / 1.2m
|
|
E - Connection (NPT)
|
1in NPT
|
|
Weight
|
14lbs
|
-
Description
Packer tests consist of isolating specific sections of a bedrock borehole with inflatable packers. Water-quality samples can then be collected and aquifer tests can be carried out. A series of such tests allows for the definition of the vertical distribution of water quality (usually contaminants) and hydraulic conductivity or pathways for water and contaminant movement in an aquifer.Monitoring water levels in nearby wells while pumping packed intervals can identify permeable intervals within an aquifer. Information from the packer tests can then be used to properly site the future location of monitoring wells. SolutionsSmaller packers designed to fit a submersible sampling pump can be used to replace " nested wells" to isolate the lower part of a monitoring well. Isolation by the packer allows reduced water volumes to be purged prior to sampling. This reduction can be beneficial because it can reduce purge times and may limit the handling and disposal of contaminated water. Specifications: Max Pressure 185psi / 13kg/cm² Max Diameter 5in / 127mm A - At Rest Diameter 2.13in / 54mm B - Mandrel ID 1in / 25mm C - Element Length 24.5in / 620mm D - Overall Length 48in / 1.2m E - Connection (NPT) 1in NPT Weight 14lbs
Packer tests consist of isolating specific sections of a bedrock borehole with inflatable packers. Water-quality samples can then be collected and aquifer tests can be carried out. A series of such tests allows for the definition of the vertical distribution of water quality (usually contaminants) and hydraulic conductivity or pathways for water and contaminant movement in an aquifer.
Monitoring water levels in nearby wells while pumping packed intervals can identify permeable intervals within an aquifer.
Information from the packer tests can then be used to properly site the future location of monitoring wells.
Solutions
Smaller packers designed to fit a submersible sampling pump can be used to replace " nested wells" to isolate the lower part of a monitoring well. Isolation by the packer allows reduced water volumes to be purged prior to sampling. This reduction can be beneficial because it can reduce purge times and may limit the handling and disposal of contaminated water.
Specifications:
|
Max Pressure
|
185psi / 13kg/cm²
|
|
Max Diameter
|
5in / 127mm
|
|
A - At Rest Diameter
|
2.13in / 54mm
|
|
B - Mandrel ID
|
1in / 25mm
|
|
C - Element Length
|
24.5in / 620mm
|
|
D - Overall Length
|
48in / 1.2m
|
|
E - Connection (NPT)
|
1in NPT
|
|
Weight
|
14lbs
|
1.5"-2.25" Pneumatic Packer Model 12
Packer tests consist of isolating specific sections of a bedrock borehole with inflatable packers. Water-quality samples can then be collected and aquifer tests can be carried out. A series of such...
1.75"-3.5" Pneumatic Packer Model 23B
Packer tests consist of isolating specific sections of a bedrock borehole with inflatable packers. Water-quality samples can then be collected and aquifer tests can be carried out. A series of such...
1.75"-3.5" Pneumatic Packer Model 23B Grout
Packer tests consist of isolating specific sections of a bedrock borehole with inflatable packers. Water-quality samples can then be collected and aquifer tests can be carried out. A series of such...
Shelby Tube Expansion Packers / Soil Seals
Shelby Tube Expansion Packers are also known as Soil Seals and Expansion Plugs. ECT Manufacturing's Soil Seals provide a safe and effective method of preserving the collected soil sample. The...
Solinst®
LevelVent Model 3250
Call for Price
The Solinst LevelVent is designed to provide instantly accurate water level data. Without the need for barometric compensation, the data is 2x more accurate than our Levelogger water level...
Solinst®
AquaVent Model 3500
Call for Price
The Solinst AquaVent is designed to be maintenance free, using hydrophobic filters and permanent factory installed desiccants, with convenient user replaceable wellhead batteries and custom...
2.5" Round Vinyl Liner Cap
Ensure the integrity and safety of your sample with high quality secure fitting vinyl end caps. Designed to fit tube 2.5" OD Material: VinylID: 2.5"OD: 2.65"Length: 1"Service Temperature: -26 - 350°...
Solinst®
Model 601 Standpipe Piezometer
Call for Price
Model 601 Standpipe Piezometers are composed of a 3/4" diameter PVC body, which is perforated to expose the preformed Vyon filter inside. The PVC tip connects to plain end 3/4" Sch. 40 PVC riser pipe...