4" Internal Push-In Point, Sch40
- SKU:
- 32-040-FRPT
Coverts PVC with no threads into usuable well bottoms. Slips inside the ID of 4" sch40 PVC.
Features
Tapered verticle ridges lock point in place
OD of point is flush with OD of 4" PVC
Designed for sch40 PVC with no threads
Convert a cut-off screen into a usable screen bottom
Convert a cut-off riser into a sump
-
Description
Coverts PVC with no threads into usuable well bottoms. Slips inside the ID of 4" sch40 PVC. Features Tapered verticle ridges lock point in place OD of point is flush with OD of 4" PVC Designed for sch40 PVC with no threads Convert a cut-off screen into a usable screen bottom Convert a cut-off riser into a sump
Coverts PVC with no threads into usuable well bottoms. Slips inside the ID of 4" sch40 PVC.
Features
Tapered verticle ridges lock point in place
OD of point is flush with OD of 4" PVC
Designed for sch40 PVC with no threads
Convert a cut-off screen into a usable screen bottom
Convert a cut-off riser into a sump
ECT Mfg., Inc.
.75" Internal Push-In Point, Sch40
Screen Saver
Coverts PVC with no threads into usuable well bottoms. Slips inside the ID of 3/4" sch40 PVC. Features Solid grey PVC Tapered design locks point in place OD...
ECT Mfg., Inc.
1" Internal Push-In Point, Sch40
For Pipe With No Thread
Coverts PVC with no threads into usuable well bottoms. Slips inside the ID of 1" sch40 PVC. Features Solid grey PVC Tapered design locks point in place OD of...
ECT Mfg., Inc.
3" Internal Push-In Plug, Sch40
Designed to slip inside the ID of 3" sch40 PVC. OD is flush with OD of pipe. Works with pipe that has no threads.
ECT Mfg., Inc.
6" Internal Push-In Plug, Sch40
Designed to slip inside the ID of 6" sch40 PVC. OD is flush with OD of pipe. Works with pipe that has no threads.
ECT Mfg., Inc.
2" Internal Push-In Point
Screen Saver
Converts PVC with no threads into usuable well bottoms. Slips inside the ID of 2" sch40 PVC. Features Tapered verticle ridges lock point in place OD of point is flush with OD of 2" PVC Designed for...
Qwater
4" Well Developer, Sch40/Sch80
Use with 1-1/2" Pipe
The Production Series Qwater Well Developers are reusable. Made of tough ABS body and molded 1.5-inch steel female NPT pipe fitting for attaching to a weighted wireline or drill pipe. Although the...
Johnson Screens®
PVC Surge Block 4" Sch40
Uses 1-1/4" Flush Thread or NPT
Pipe Ends 1.25" Male NPT x Female 8 TPI. Johnson PVC open core Surge Blocks are used in well rehabilitation or well development. These units come standard with a Female FJT Thread on one end and a...
ECT Mfg., Inc.
4" Sch40 Steel Bollard / Bumper Post
In Stock
Steel sch40 Protective Bollard, All Steel Construction, Safety Yellow Powdercoat Specifications4.5″ OD round steel pipe0.25″ (Sch40) wall thicknessSand Blasted and Outdoor Safety Yellow Powder...
ECT Mfg., Inc.
Solid PVC Surge Block 4" Sch40
Use with 1" NPT Pipe
Plunger style Surge block that utilizes a solid piece of PVC with 2 rubber O-rings to create a seal around the casing. There is no developing port. Instead, it has 2 check valves on either side of...