Alconox Cleaning Detergent

Alconox is a concentrated, anionic detergent for manual and ultrasonic cleaning. It is free rinsing to give you reliable results without interfering residues. Excellent replacement for corrosive acids and hazardous solvents. USDA authorized. Dilute 1:100. pH 9.5Applications: Glass, metal, stainless steel, porcelain, ceramic, plastic, rubber and fiberglass. Can be used on soft metals such as copper, aluminum, zinc and magnesium if rinsed promptly.Makes up to 50 gallons of cleaner or 200LUsed to Clean: Healthcare instruments, laboratory ware, vacuum equipment, tissue culture ware, personal protective equipment, sampling apparatus, catheters, tubing, pipes, radioactive contaminated articles, optical parts, electronic components, pharmaceutical apparatus, cosmetics manufacturing equipment, metal castings, forgings and stampings, industrial parts, tanks and reactors. Authorized by USDA for use in federally inspected meat and poultry plants. Passes inhibitory residue test for water analysis. FDA certified. Used to Remove: Soil, grit, grime, buffing compound, slime, grease, oils, blood, tissue, salts, deposits, particulates, solvents, chemicals, radioisotopes, radioactive contaminations, silicon oils, mold release agents. Surfaces Cleaned: Corrosion inhibited formulation recommended for glass, metal, stainless steel, porcelain, ceramic, plastic, rubber and fiberglass. Can be used on soft metals such as copper, aluminum, zinc and magnesium if rinsed promptly. Corrosion testing may be advisable. Cleaning Method: Soak, brush, sponge, cloth, ultrasonic, flow through clean-in-place. Will foam—not for spray or machine use. Directions: Make a fresh 1% solution (2 1/2 tbsp per gal, 1 1/4 oz per gal, or 10 g per L) in cold, warm, or hot water. If available, use warm water. Use cold water for blood stains. For difficult soils, raise water temperature and use more detergent. Clean by soak, circulate, wipe, or ultrasonic method. Not for spray machines: will foam. For nonabrasive scouring, make paste. Use 2% solution to soak frozen stopcocks. To remove silver tarnish, soak in 1% solution in aluminum container. RINSE THOROUGHLY—preferably with running water. For critical cleaning, do final or all rinsing in distilled, deionized, or purified water. For food contact surfaces, rinse with potable water. Used on a wide range of glass, ceramic, plastic, and metal surfaces. Corrosion testing may be advisable. Material compatibility guidelines available on request Concentrated, anionic detergent for manual and ultrasonic cleaning. Free rinsing to give you reliable results without interfering residues. Ideal for cleaning contaminants from glassware, metals, plastics, ceramic, porcelain, rubber and fiberglass. Excellent replacement for corrosive acids and hazardous solvents. USDA authorized. Dilute 1:100. pH 9.5 Alconox is a non-corrosive, high foaming formula that can be used on metals. Biodegradable, odorless, colorless and mild (pH 9-9.5). Completely soluble and leaves no residue after proper rinsing. Special formulation removes fats. It is the cleaner of choice because it rinses clean and will not leave film residue behind on tools or equipment. We also offer Alconox in packet form for smaller uses. Alconox is FDA-approved and USDA-authorized. Alconox® detergent is a concentrated powdered cleaner for both manual and ultrasonic cleaning of glass, metal, and plastic. It is used to clean various healthcare instruments, laboratory ware, vacuum equipment, tissue culture ware, personal protective equipment, etc. Biodegradable and readily disposable - potential substitute for corrosive acids and hazardous solvents. High performance, anionic and low foaming - does not damage the washer parts and leave behind any residue. Powdered detergent for general lab cleaning. Legal Information ALCONOX is a registered trademark of Alconox, Inc.