Bairod EZ-MUD® Polymer Emulsion
- SKU:
- EZMUD
Baroid EZ-MUD® liquid polymer emulsion contains partially hydrolyzed polyacrylamide/polyacrylate (PHPA) copolymer. It is used primarily as a borehole stabilizer to help prevent reactive shale and clay from swelling and sloughing. EZ-MUD polymer is also added to low-solids drilling fluids to help increase lubricity, fluid viscosity, and to help improve carrying capacity of air/foam injection fluids.
APPLICATION / FUNCTION
Stabilize reactive shale and clay formations
Improve drilling efficiency in multiple disciplines such as Water Well, Minerals Exploration, Geotechnical, HDD and Construction Applications
Enhance slurry rheological properties
Alleviate mud rings, bit balling and booting-off in clay formations
Reduce drill pipe torque and pumping pressure
Minimize rod chatter in diamond core drilling
Create “stiff-foam” and maintain foam integrity
Flocculate non-reactive solids in reserve pit at low concentrations
ADVANTAGES
Mixes easily with minimum shear in fresh water
Helps provide effective clay and shale stabilization with lower viscosity
Helps impart high degree of lubricity
Non-fermenting
Breaks down chemically with household bleach (sodium hypochlorite)
NSF/ANSI Standard 60 Certified
TYPICAL PROPERTIES
Appearance: Thick, opaque white liquid
Density (Specific Gravity): 8.4 lb/gal (1.01 g/cm3)
pH (1 quart per 100 gallons water): 8.5
Flash point, PMCC °F, °C: >200 (>93.3)
Thermal stability, °F, °C: 250 (121)
Notes:
For optimum performance in freshwater applications, the make-up water used to mix EZ-MUD liquid polymer should meet the following quality:
– Total chloride less than 1500 ppm (mg/L)
– Total hardness less than 150 ppm as calcium
– Total chlorine less than 50 ppm
– Water pH between 8.5 – 9.5
Reduce total hardness of make-up water by adding Soda Ash at 0.5 to 1 pound per 100 gallons (0.6 – 1.2 kg/m3) of make-up water.
EZ-MUD liquid polymer can be chemically broken down with liquid bleach in regular household concentration (5% sodium hypochlorite). Use one gallon of liquid bleach per 100 gallons (10 liters/m3) of fluid formulated with EZ-MUD liquid polymer.
Do not use perfumed liquid bleach or solid calcium hypochlorite.
Product of USA
-
Description
Baroid EZ-MUD® liquid polymer emulsion contains partially hydrolyzed polyacrylamide/polyacrylate (PHPA) copolymer. It is used primarily as a borehole stabilizer to help prevent reactive shale and clay from swelling and sloughing. EZ-MUD polymer is also added to low-solids drilling fluids to help increase lubricity, fluid viscosity, and to help improve carrying capacity of air/foam injection fluids. APPLICATION / FUNCTIONStabilize reactive shale and clay formationsImprove drilling efficiency in multiple disciplines such as Water Well, Minerals Exploration, Geotechnical, HDD and Construction ApplicationsEnhance slurry rheological propertiesAlleviate mud rings, bit balling and booting-off in clay formationsReduce drill pipe torque and pumping pressureMinimize rod chatter in diamond core drillingCreate “stiff-foam” and maintain foam integrityFlocculate non-reactive solids in reserve pit at low concentrations ADVANTAGESMixes easily with minimum shear in fresh waterHelps provide effective clay and shale stabilization with lower viscosityHelps impart high degree of lubricityNon-fermentingBreaks down chemically with household bleach (sodium hypochlorite)NSF/ANSI Standard 60 Certified TYPICAL PROPERTIESAppearance: Thick, opaque white liquidDensity (Specific Gravity): 8.4 lb/gal (1.01 g/cm3)pH (1 quart per 100 gallons water): 8.5Flash point, PMCC °F, °C: >200 (>93.3)Thermal stability, °F, °C: 250 (121)Notes: For optimum performance in freshwater applications, the make-up water used to mix EZ-MUD liquid polymer should meet the following quality:– Total chloride less than 1500 ppm (mg/L)– Total hardness less than 150 ppm as calcium– Total chlorine less than 50 ppm– Water pH between 8.5 – 9.5Reduce total hardness of make-up water by adding Soda Ash at 0.5 to 1 pound per 100 gallons (0.6 – 1.2 kg/m3) of make-up water.EZ-MUD liquid polymer can be chemically broken down with liquid bleach in regular household concentration (5% sodium hypochlorite). Use one gallon of liquid bleach per 100 gallons (10 liters/m3) of fluid formulated with EZ-MUD liquid polymer.Do not use perfumed liquid bleach or solid calcium hypochlorite. Product of USA
- Data Sheets
Baroid EZ-MUD® liquid polymer emulsion contains partially hydrolyzed polyacrylamide/polyacrylate (PHPA) copolymer. It is used primarily as a borehole stabilizer to help prevent reactive shale and clay from swelling and sloughing. EZ-MUD polymer is also added to low-solids drilling fluids to help increase lubricity, fluid viscosity, and to help improve carrying capacity of air/foam injection fluids.
APPLICATION / FUNCTION
Stabilize reactive shale and clay formations
Improve drilling efficiency in multiple disciplines such as Water Well, Minerals Exploration, Geotechnical, HDD and Construction Applications
Enhance slurry rheological properties
Alleviate mud rings, bit balling and booting-off in clay formations
Reduce drill pipe torque and pumping pressure
Minimize rod chatter in diamond core drilling
Create “stiff-foam” and maintain foam integrity
Flocculate non-reactive solids in reserve pit at low concentrations
ADVANTAGES
Mixes easily with minimum shear in fresh water
Helps provide effective clay and shale stabilization with lower viscosity
Helps impart high degree of lubricity
Non-fermenting
Breaks down chemically with household bleach (sodium hypochlorite)
NSF/ANSI Standard 60 Certified
TYPICAL PROPERTIES
Appearance: Thick, opaque white liquid
Density (Specific Gravity): 8.4 lb/gal (1.01 g/cm3)
pH (1 quart per 100 gallons water): 8.5
Flash point, PMCC °F, °C: >200 (>93.3)
Thermal stability, °F, °C: 250 (121)
Notes:
For optimum performance in freshwater applications, the make-up water used to mix EZ-MUD liquid polymer should meet the following quality:
– Total chloride less than 1500 ppm (mg/L)
– Total hardness less than 150 ppm as calcium
– Total chlorine less than 50 ppm
– Water pH between 8.5 – 9.5
Reduce total hardness of make-up water by adding Soda Ash at 0.5 to 1 pound per 100 gallons (0.6 – 1.2 kg/m3) of make-up water.
EZ-MUD liquid polymer can be chemically broken down with liquid bleach in regular household concentration (5% sodium hypochlorite). Use one gallon of liquid bleach per 100 gallons (10 liters/m3) of fluid formulated with EZ-MUD liquid polymer.
Do not use perfumed liquid bleach or solid calcium hypochlorite.
Product of USA
AMS, Inc.
Mud Auger AMS Quick Connect
AMS Mud Augers utilize a laser-cut, open cylinder design for easy removal of heavy, wet, or clay soils. The AMS mud auger features two openings in the cylinder wall to facilitate emptying as well as...
AMS, Inc.
5/8" Thread Mud Auger
AMS Mud Augers utilize a laser-cut, open cylinder design for easy removal of heavy, wet, or clay soils. The AMS mud auger features two openings in the cylinder wall to facilitate emptying as well as...
Proactive Env Products®
Poseidon® 60 Remediation Pump
This Pump Is PFOA Free
The low amp draw, hardworking Poseidon® 60 Pump fits into 2 inch schedule 40 and 80, and larger diameter wells. Poseidon® 60 Pump is powered by a 12 volt DC power source such your vehicle. For remote...
Geoprobe®
2.0 Interlocking Split Spoon Sheath (28.5 in. Length)
Call for Price
2.0 Interlocking Split Spoon Sheath (28.5 in. Length)
