1.75"-3.5" Pneumatic Packer Model 23B Grout
- SKU:
- PKR-23BG
Packer tests consist of isolating specific sections of a bedrock borehole with inflatable packers. Water-quality samples can then be collected and aquifer tests can be carried out. A series of such tests allows for the definition of the vertical distribution of water quality (usually contaminants) and hydraulic conductivity or pathways for water and contaminant movement in an aquifer.
Monitoring water levels in nearby wells while pumping packed intervals can identify permeable intervals within an aquifer.
Information from the packer tests can then be used to properly site the future location of monitoring wells.
Solutions
Smaller packers designed to fit a submersible sampling pump can be used to replace " nested wells" to isolate the lower part of a monitoring well. Isolation by the packer allows reduced water volumes to be purged prior to sampling. This reduction can be beneficial because it can reduce purge times and may limit the handling and disposal of contaminated water.
Specifications:
|
Max Pressure
|
360psi / 25.3 kg/cm²
|
|
Max Diameter
|
3.94in / 100mm
|
|
A - At Rest Diameter
|
1.66in / 42mm
|
|
B - Mandrel ID
|
0.75in / 19mm
|
|
C - Element Length
|
25.5in / 650mm
|
|
D - Overall Length
|
44in / 1.12m
|
|
E - Connection (NPT)
|
3/8in NPT
|
|
Weight
|
8lbs
|
-
Description
Packer tests consist of isolating specific sections of a bedrock borehole with inflatable packers. Water-quality samples can then be collected and aquifer tests can be carried out. A series of such tests allows for the definition of the vertical distribution of water quality (usually contaminants) and hydraulic conductivity or pathways for water and contaminant movement in an aquifer.Monitoring water levels in nearby wells while pumping packed intervals can identify permeable intervals within an aquifer. Information from the packer tests can then be used to properly site the future location of monitoring wells. SolutionsSmaller packers designed to fit a submersible sampling pump can be used to replace " nested wells" to isolate the lower part of a monitoring well. Isolation by the packer allows reduced water volumes to be purged prior to sampling. This reduction can be beneficial because it can reduce purge times and may limit the handling and disposal of contaminated water. Specifications: Max Pressure 360psi / 25.3 kg/cm² Max Diameter 3.94in / 100mm A - At Rest Diameter 1.66in / 42mm B - Mandrel ID 0.75in / 19mm C - Element Length 25.5in / 650mm D - Overall Length 44in / 1.12m E - Connection (NPT) 3/8in NPT Weight 8lbs
Packer tests consist of isolating specific sections of a bedrock borehole with inflatable packers. Water-quality samples can then be collected and aquifer tests can be carried out. A series of such tests allows for the definition of the vertical distribution of water quality (usually contaminants) and hydraulic conductivity or pathways for water and contaminant movement in an aquifer.
Monitoring water levels in nearby wells while pumping packed intervals can identify permeable intervals within an aquifer.
Information from the packer tests can then be used to properly site the future location of monitoring wells.
Solutions
Smaller packers designed to fit a submersible sampling pump can be used to replace " nested wells" to isolate the lower part of a monitoring well. Isolation by the packer allows reduced water volumes to be purged prior to sampling. This reduction can be beneficial because it can reduce purge times and may limit the handling and disposal of contaminated water.
Specifications:
|
Max Pressure
|
360psi / 25.3 kg/cm²
|
|
Max Diameter
|
3.94in / 100mm
|
|
A - At Rest Diameter
|
1.66in / 42mm
|
|
B - Mandrel ID
|
0.75in / 19mm
|
|
C - Element Length
|
25.5in / 650mm
|
|
D - Overall Length
|
44in / 1.12m
|
|
E - Connection (NPT)
|
3/8in NPT
|
|
Weight
|
8lbs
|
1.75"-3.5" Pneumatic Packer Model 23B
Packer tests consist of isolating specific sections of a bedrock borehole with inflatable packers. Water-quality samples can then be collected and aquifer tests can be carried out. A series of such...
1.5"-2.25" Pneumatic Packer Model 12
Packer tests consist of isolating specific sections of a bedrock borehole with inflatable packers. Water-quality samples can then be collected and aquifer tests can be carried out. A series of such...
2.5"-4.25" Pneumatic Packer Model 34B
Packer tests consist of isolating specific sections of a bedrock borehole with inflatable packers. Water-quality samples can then be collected and aquifer tests can be carried out. A series of such...
CETCO
Cetco Grout, 50 lb.
CETCO GROUT is a 20% solids, polymer-free, single-component, easy-to-use sodium bentonite grout available in powdered form. CETCO GROUT allows placement in a low viscosity state. CETCO GROUT is...
ECT Mfg., Inc.
1.5" Grout/Injection Pull Cap
1.5" Grout/Injection Pull Cap with 3/4" NPT Side Port
Geoprobe®
SP15/SP16 Grout Plug Push Adapter
Call for Price
Threads to the Extension Rods and helps push the Grout Plug out of the Screen in order to grout out of the bottom of the Screen.
Geoprobe®
1.5″ Grout/Injection Pull Cap, Geoprobe®
Call for Price
1.5″ Grout/Injection Pull Cap, Geoprobe®
Shelby Tube Expansion Packers / Soil Seals
Shelby Tube Expansion Packers are also known as Soil Seals and Expansion Plugs. ECT Manufacturing's Soil Seals provide a safe and effective method of preserving the collected soil sample. The...