Kwik Klamp 2, Adjustable 2.5" to 4"

The heavy duty KWIK KLAMP 2 is the driller's answer for holding the larger pipe sizes 2 1/2", 3", and 4" (4.5" OD).  KWIK KLAMP 2 is an enlarged version of our popular KWIK KLAMP 1, which is for pipe sizes 1" through 2", with many of the same features.  This tool has been used worldwide by environmental drillers, pump installers, well servicemen, and water well drillers. Main body is constructed of 2" and 2 1/2" 1/4" wall steel tube. Easy to operate, over center locking of jaws when downward pressure is applied to a 19" long lever handle. 1/2" safety pin used to prevent accidental unclamping. KWIK KLAMP2 allows workers to bring pipe or drill joint up to an easy working level. The tool weighs only 30 lbs. and is 20" long x 7 1/2" wide. Jaws are equipped with 16 carbide-tipped grippers. Excellent holding capability, with load tests done over 7,000 lbs. Designed to hold pipes 2 1/2", 3" and 4" PVC, HDPE, stainless, and galvanized steel. KWIK KLAMP is one of the safest, time-saving tools you will ever own. Especially designed for holding 2" and 2 1/2" pipe using the KWIK KLAMP 2. Increased holding capacity. Set of 4 serrated hardened jaws with bolts. Additional (4) spacers can be purchased to accommodate 4 1/2" pipe. Spacers will be placed on the middle two jaw pads on each side. KWIK KLAMP 2 allows workers to bring pipe or drill joint up to an easy working level. The jaws are equipped with 16 carbide tipped gripper bolts. Designed to hold pipe sizes 2-1/2″, 3″ and 4″ (2.875″OD-4.5″OD) PVC, HDPE, stainless and galvanized. The KK 2 has excellent holding capabilities with loads over 7,000 lbs. KK2 Load Test Report:  ESP026328P J&K Tool KK2 Final The KWIK KLAMP is one of the safest time saving tools you will ever own.  An additional jaw set can be purchased to extend the holding capacity of the Kwik Klamp 2 down to 2″ pipe