2.25" Injection Check Valve
- SKU:
- INJP83K
ECT Mfg., Inc.
Call for pricing 888-240-4328
-
Description
ECTs 2.25" Injection Check Valve is for use with your 2.25" Injection Tool String. Within the tool, you will find a one-way pressure activated kit which prevents backflow of your injection material. This Injection Check Valve can be implemented in both top-down and bottom-up injection using the corresponding Pull Cap.
ECT Mfg., Inc.
AWJ Injection Check Valve
AWJ Injection Check Valve (Complete) With stainless steel ball, pin down
ECT Mfg., Inc.
1.5″ Injection Check Valve
The 1-1/2" Injection Check Valve attaches to your 1.5" Geoprobe Rod. The main feature of this probe is that it prevents remediation back-flow, keeping injection material in the ground and not on the...
Geoprobe®
2.25 in. Check Rod
Call for Price
6 in. (Nylon Ball: 101120, Spring Pin: 106971) MN: 213070
ECT Mfg., Inc.
2.25" Retractable Injection Tool
Call for Price
ECT's 2.25" OD 'Retractable' Injection Tool is driven to the target depth using 2-1/4" Geoprobe® Probe Rods. The rods are then retracted to expose the section of injection ports. The upper and lower...
Geoprobe®
2.25″ Pressue Activated Probe Check Valve Kit, Geoprobe®
Call for Price
This Check valve kit fits Geoprobe® Pressure Activated Injection Probes; 1.25", 1.50" and 2.25". Used in combination with the spring and probe to prevent material backflow.
ECT Mfg., Inc.
2.25" Top Down Injection Tool
Call for Price
ECT's 2.25" 'Top-Down' Injection Tool is driven to the top of the intended injection interval using 2-1/4" Geoprobe® Probe Rods. After the initial injection at the top of your interval, it can then...
Geoprobe®
2.25″ Injection Pull Cap, Geoprobe®
Call for Price
The 2.25" Injection Pull Cap is on a swivel that adds a flange and allows pulling of the tool string during bottom-up injection. There is an O-ring that creates a watertight seal. The grout pump can...
ECT Mfg., Inc.
2.25" Injection Cap w/ 1" F-NPT
ECT's 2.25" Injection Cap with 1" F-NPT was designed to fit your 2.25" Geoprobe Rod. The 1" Female NPT thread can be used to set up a quick-connect hose for your injection pump.
Geoprobe®
2.25″ Pressure Activated Injection Probe, Geoprobe®
Call for Price
The Pressure-Activated Injection Probe allows for both bottom-up or top-down injection of remediation material when using any Geoprobe grout or injection machine. The Injection probe injects material...