2.25" Retractable Injection Tool
- SKU:
- INJ225-24
ECT Mfg., Inc.
Call for pricing 888-240-4328
ECT's 2.25" OD 'Retractable' Injection Tool is driven to the target depth using 2-1/4" Geoprobe® Probe Rods. The rods are then retracted to expose the section of injection ports. The upper and lower halves of the tool seal off the zones above and below the injection ports, allowing the injection compounds to be injected into the desired zones while retracting the tool string using the 2.25" Injection Pull Cap or the 2.25" Injection Cap for through the rod injection. The horizontal injection tool has been successfully used with many compounds including ORC, HRC and Potassium Permanganate. It can be easily disassembled for decontamination and cleaning.
-
Description
ECT's 2.25" OD 'Retractable' Injection Tool is driven to the target depth using 2-1/4" Geoprobe® Probe Rods. The rods are then retracted to expose the section of injection ports. The upper and lower halves of the tool seal off the zones above and below the injection ports, allowing the injection compounds to be injected into the desired zones while retracting the tool string using the 2.25" Injection Pull Cap or the 2.25" Injection Cap for through the rod injection. The horizontal injection tool has been successfully used with many compounds including ORC, HRC and Potassium Permanganate. It can be easily disassembled for decontamination and cleaning.
ECT's 2.25" OD 'Retractable' Injection Tool is driven to the target depth using 2-1/4" Geoprobe® Probe Rods. The rods are then retracted to expose the section of injection ports. The upper and lower halves of the tool seal off the zones above and below the injection ports, allowing the injection compounds to be injected into the desired zones while retracting the tool string using the 2.25" Injection Pull Cap or the 2.25" Injection Cap for through the rod injection. The horizontal injection tool has been successfully used with many compounds including ORC, HRC and Potassium Permanganate. It can be easily disassembled for decontamination and cleaning.
ECT Mfg., Inc.
1.5" Retractable Injection Tool
Call for Price
ECT’s 1.5″ OD “Retractable” Injection Tool is driven to the target depth using 1.5″ Probe Rods. The rods are then retracted to expose the 24″ section of injection ports. The upper and lower halves of...
ECT Mfg., Inc.
2.25" Top Down Injection Tool
Call for Price
ECT's 2.25" 'Top-Down' Injection Tool is driven to the top of the intended injection interval using 2-1/4" Geoprobe® Probe Rods. After the initial injection at the top of your interval, it can then...
ECT Mfg., Inc.
2.25" Injection Check Valve
Call for Price
ECTs 2.25" Injection Check Valve is for use with your 2.25" Injection Tool String. Within the tool, you will find a one-way pressure activated kit which prevents backflow of your injection material...
Geoprobe®
2.25″ Injection Pull Cap, Geoprobe®
Call for Price
The 2.25" Injection Pull Cap is on a swivel that adds a flange and allows pulling of the tool string during bottom-up injection. There is an O-ring that creates a watertight seal. The grout pump can...
ECT Mfg., Inc.
2.25" Injection Cap w/ 1" F-NPT
ECT's 2.25" Injection Cap with 1" F-NPT was designed to fit your 2.25" Geoprobe Rod. The 1" Female NPT thread can be used to set up a quick-connect hose for your injection pump.
Geoprobe®
2.25″ Pressure Activated Injection Probe, Geoprobe®
Call for Price
The Pressure-Activated Injection Probe allows for both bottom-up or top-down injection of remediation material when using any Geoprobe grout or injection machine. The Injection probe injects material...
Geoprobe®
2.25 EXP PT HOLDER SHORT 2.25 in. OD
Call for Price
2.25" EXPENDABLE POINT HOLDER (2.25"OD)
Geoprobe®
2.25 in. Check Rod
Call for Price
6 in. (Nylon Ball: 101120, Spring Pin: 106971) MN: 213070
AMS, Inc.
2.25" Environmental Kit
All stainless steel for environmental sampling.Used in soils with low levels of contaminants or where equipment will be cleaned using an acid bath technique. Contains the same components as the basic...