2" Internal Push-In Point
- SKU:
- 32-020-FRPT
Converts PVC with no threads into usuable well bottoms. Slips inside the ID of 2" sch40 PVC.
Features
- Tapered verticle ridges lock point in place
- OD of point is flush with OD of 2" PVC
- Designed for sch40 PVC with no threads
- Convert cut-off screen scrap into a usable screen bottom
- Convert cut-off riser scrap into a sump
- Save time and money
-
Description
Converts PVC with no threads into usuable well bottoms. Slips inside the ID of 2" sch40 PVC. Features Tapered verticle ridges lock point in place OD of point is flush with OD of 2" PVC Designed for sch40 PVC with no threads Convert cut-off screen scrap into a usable screen bottom Convert cut-off riser scrap into a sump Save time and money
-
Data Sheets
Converts PVC with no threads into usuable well bottoms. Slips inside the ID of 2" sch40 PVC.
Features
- Tapered verticle ridges lock point in place
- OD of point is flush with OD of 2" PVC
- Designed for sch40 PVC with no threads
- Convert cut-off screen scrap into a usable screen bottom
- Convert cut-off riser scrap into a sump
- Save time and money
ECT Mfg., Inc.
.75" Internal Push-In Point, Sch40
Screen Saver
Coverts PVC with no threads into usuable well bottoms. Slips inside the ID of 3/4" sch40 PVC. Features Solid grey PVC Tapered design locks point in place OD...
ECT Mfg., Inc.
4" Internal Push-In Point, Sch40
Coverts PVC with no threads into usuable well bottoms. Slips inside the ID of 4" sch40 PVC. Features Tapered verticle ridges lock point in place OD of point is flush with OD...
ECT Mfg., Inc.
1" Internal Push-In Point, Sch40
For Pipe With No Thread
Coverts PVC with no threads into usuable well bottoms. Slips inside the ID of 1" sch40 PVC. Features Solid grey PVC Tapered design locks point in place OD of...
ECT Mfg., Inc.
3" Internal Push-In Plug, Sch40
Designed to slip inside the ID of 3" sch40 PVC. OD is flush with OD of pipe. Works with pipe that has no threads.
ECT Mfg., Inc.
6" Internal Push-In Plug, Sch40
Designed to slip inside the ID of 6" sch40 PVC. OD is flush with OD of pipe. Works with pipe that has no threads.
Schumaprobe 2" Sparge Point
In Stock
Porous polyethylene well screen, designed to minimize flow resistance by providing 35% – 45% porosity uniformly distributed along the entire length of the well screen. Greater porosity, uniform pore...
ECT Mfg., Inc.
2" Male / Female Threaded Point
One-Piece Construction
2" Injection Molded Well Points available Male and Female Points 2 TPI Molded from Prime Virgin PVCInjected molded for consistent guaranteed thread tolerances every timeEasy tightening grip tabs make...
Johnson Screens®
2" Stainless Steel Drive Point
Johnson Screens stainless steel drive points are highly resistant to corrosive waters, avoiding problems of rapid corrosion and incrustation that can occur in two-metal construction. Drive points...
Geoprobe®
SP15/SP16 Screen Push Adapter
Call for Price
Threads to the Extension Rods and helps push the Screen out of the Sheath in order to pull a water sample.