2.25" Injection Cap w/ 1" F-NPT
- SKU:
- INJP779
-
Description
ECT's 2.25" Injection Cap with 1" F-NPT was designed to fit your 2.25" Geoprobe Rod. The 1" Female NPT thread can be used to set up a quick-connect hose for your injection pump.
ECT Mfg., Inc.
1.5" Injection Cap 3/4" F-NPT
1.5" Injection Cap, 3/4" F-NPT ECT's Injection Cap with 3/4" F-NPT works with 1.5" Geoprobe probe rod. The .75" Female NPT thread is ideal to set up a quick-connect hose for your injection...
Geoprobe®
2.25″ Injection Pull Cap, Geoprobe®
Call for Price
The 2.25" Injection Pull Cap is on a swivel that adds a flange and allows pulling of the tool string during bottom-up injection. There is an O-ring that creates a watertight seal. The grout pump can...
ECT Mfg., Inc.
2.25" Retractable Injection Tool
Call for Price
ECT's 2.25" OD 'Retractable' Injection Tool is driven to the target depth using 2-1/4" Geoprobe® Probe Rods. The rods are then retracted to expose the section of injection ports. The upper and lower...
ECT Mfg., Inc.
2.25" Injection Check Valve
Call for Price
ECTs 2.25" Injection Check Valve is for use with your 2.25" Injection Tool String. Within the tool, you will find a one-way pressure activated kit which prevents backflow of your injection material...
ECT Mfg., Inc.
2.25" Top Down Injection Tool
Call for Price
ECT's 2.25" 'Top-Down' Injection Tool is driven to the top of the intended injection interval using 2-1/4" Geoprobe® Probe Rods. After the initial injection at the top of your interval, it can then...
Geoprobe®
2.25″ Pressure Activated Injection Probe, Geoprobe®
Call for Price
The Pressure-Activated Injection Probe allows for both bottom-up or top-down injection of remediation material when using any Geoprobe grout or injection machine. The Injection probe injects material...
ECT Mfg., Inc.
1.5" Grout/Injection Pull Cap
1.5" Grout/Injection Pull Cap with 3/4" NPT Side Port
