2.25" Injection Tooling

ECT Manufacturing

2.25" Retractable Injection Tool

Call for Price

ECT's 2.25" OD 'Retractable' Injection Tool is driven to the target depth using 2-1/4" Geoprobe® Probe Rods. The rods are then retracted to expose the section of injection ports. The upper and lower halves of the tool seal off the zones above and...

VIEW PRODUCT

ECT Manufacturing

2.25" Top Down Injection Tool

Call for Price

ECT's 2.25" 'Top-Down' Injection Tool is driven to the top of the intended injection interval using 2-1/4" Geoprobe® Probe Rods. After the initial injection at the top of your interval, it can then be driven further and the process repeated until the...

VIEW PRODUCT

ECT Manufacturing

2.25" Injection Check Valve

Call for Price

ECTs 2.25" Injection Check Valve is for use with your 2.25" Injection Tool String. Within the tool, you will find a one-way pressure activated kit which prevents backflow of your injection material. This Injection Check Valve can be implemented in both...

VIEW PRODUCT

ECT Manufacturing

2.25" Injection Cap w/ 1" F-NPT

ECT's 2.25" Injection Cap with 1" F-NPT was designed to fit your 2.25" Geoprobe Rod. The 1" Female NPT thread can be used to set up a quick-connect hose for your injection pump.

VIEW PRODUCT

ECT Manufacturing

AWJ Injection Check Valve

AWJ Injection Check Valve (Complete) With stainless steel ball, pin down

VIEW PRODUCT

Geoprobe®

2.25″ Pressure Activated Injection Probe, Geoprobe®

Call for Price

The Pressure-Activated Injection Probe allows for both bottom-up or top-down injection of remediation material when using any Geoprobe grout or injection machine. The Injection probe injects material laterally into the subsurface. Unlike more...

VIEW PRODUCT

Geoprobe®

2.25″ Injection Pull Cap, Geoprobe®

Call for Price

The 2.25" Injection Pull Cap is on a swivel that adds a flange and allows pulling of the tool string during bottom-up injection. There is an O-ring that creates a watertight seal. The grout pump can be connected with a hose on a quick connect.

VIEW PRODUCT

Geoprobe®

2.25″ Pressue Activated Probe Check Valve Kit, Geoprobe®

Call for Price

This Check valve kit fits Geoprobe® Pressure Activated Injection Probes; 1.25", 1.50" and 2.25". Used in combination with the spring and probe to prevent material backflow.

VIEW PRODUCT

Geoprobe®

2.25 in. Pres Act Inj Probe Spring

Call for Price

Replacement spring for Pressure Activated Injection Probes; 2.25".

VIEW PRODUCT